Latest Products https://www.technofabengineering.net Latest Products Sat, 30 May 2020 04:39:44 +0530 en-us https://www.technofabengineering.net Agitated Thin Film Evaporator https://www.technofabengineering.net/agitated-thin-film-evaporator.htm https://www.technofabengineering.net/agitated-thin-film-evaporator.htm Fri, 06 Jul 2018 00:00:00 +0530 Due to its inherent design features, it is ideal for thermal treatment of solutions and heat sensitive products, where reduced operating temperatures and vacuum operating pressures are desirable. The typical Agitated Thin Film Evaporator consists of a tubular heat transfer area with an external heating jacket and a fast-revolving, inner rotor with flexible or rigid wiper elements. The driving speed is adapted to the product being handled, its particular specifications and task. The feed product is evenly distributed by the rotor and its wipers over the heating surface, forming a thin liquid film of uniform thickness. Highly turbulent swirls are produced at the tip of the rotor blades and wipers with intensive mixing and agitation of the product, as it comes into contact with the heating surface. This assures excellent heat transfer combined with constant renewal of the product film and provides an even heating and short residence time of the product through the heated zone. Specifications : ·         Operating pressure from atmosphere down to 1 Ton vacuum ·         Operating temperature up to 300 oC   Key Advantages ·         Good heat conductivity (k-value), even when working with highly viscous and contaminated products ·         Minimal thermal stress, thanks to low operating capacity, therefore a short dwell time (10-20 seconds of mean dwell time) ·         No dead zone, therefore overheating prevented and perpetual high product quality guaranteed ·         Continuous mechanical cleaning of the heating surface prevents incrustations ·         High evaporation rates, due to highly turbulent film and large difference in temperature ·         Evaporation in one pass, no circulation ·         Small film thickness, no hydrostatic height Applications   Mainly used for difficult vaporization and heat exchange processes, especially where products to be handled are highly viscous and conventional plants can no longer meet user demands because heat transfer is insufficient. Due to the liquid film, mechanically generated on the heating surfaces, thin film equipment achieve much better heat transfer rates, even with highly viscous products containing solids. ·         To concentrate highly viscous products, polluted liquids, salt solutions, oils, resins, etc ·         As a sump evaporator for vacuum rectification columns ·         Sludge drainage ·         To continuously dry powdery residues ·         Heating or cooling of viscous solutions ·         Separation of close-boiling compounds ·         Recovers additional bottoms product from overhead     PET Recycling System https://www.technofabengineering.net/pet-recycling-system.htm https://www.technofabengineering.net/pet-recycling-system.htm Thu, 27 Jun 2019 00:00:00 +0530 We are into Designing Manufacturing and Exporting PET Recycling System, which is engineered with precision to match the high industrial standards. We offer wash line equipment with total design. We provide the layout details / drawing along with the design to the clients. The Pet Recycling System is widely used for recycling pet bottles by converting used bottles in flakes. Centrifugal Blower https://www.technofabengineering.net/centrifugal-blower.htm https://www.technofabengineering.net/centrifugal-blower.htm Fri, 06 Jul 2018 00:00:00 +0530 Centrifugal Blower, offered by us, is manufactured using latest technologies for high efficiency and durability. We offer Centrifugal Blower in different volume flow rate & static pressure as per the specifications of the clients. These Centrifugal Blowers are available in various material of construction to meet the demands of the buyers. Known for : ·         High performance ·         Durability ·         Low maintenance cost ·         Optimum quality ·         Less noise operation Applications : ·         Automotive industry ·         Pharmaceuticals industry   ·         Chemical Plants Flaker https://www.technofabengineering.net/flaker.htm https://www.technofabengineering.net/flaker.htm Fri, 06 Jul 2018 00:00:00 +0530 We are engaged in Manufacturing and Exporting Flaker, which converts molten mass into solid flakes. The Flaker is specially designed with utmost precision for the continuous duty. We can also offer variable speed drive system as per client’s requirement. We supply high performing Flaker in the foreign markets. Material of construction : ·         Stainless steel Special Features : ·         Trouble free economical operation ·         Continuous Process ·         High thermal efficiency ·         Controlled thermal degradation ·         Single step operation ·         Uniform flakes Process : ·         Forming thin layer of the molten mass on the outer surface of the drum rotating at very low RPM ·         The layer is cooled by the water circulation through the drum ·         Adjustable scrapper continuously scraps the solidified flakes from the drum and the flakes are collected into bags or the containers     Heat Recovery Unit https://www.technofabengineering.net/heat-recovery-unit.htm https://www.technofabengineering.net/heat-recovery-unit.htm Thu, 27 Jun 2019 00:00:00 +0530 We are a prominent Manufacturer and Exporter of Heat Recovery Unit. We offer waste heat recovery system for harnessing all types of waste heat originating from various fuels as well as from various industrial sources. Our Heat Recovery Unit is well acclaimed for high performance among the buyers across the globe. Industrial Process Equipment https://www.technofabengineering.net/industrial-process-equipment.htm https://www.technofabengineering.net/industrial-process-equipment.htm Thu, 27 Jun 2019 00:00:00 +0530 We provide a comprehensive range to Industrial Process Equipment, which includes Reactor, Hydrogenation Equipment, Autoclave, Ventury reactor etc. The vessel, the fluid, and the impeller are interrelated with each other and to achieve the optimum performance in mixing process our Industrial Processing Equipment are the best options. Solid Suspension, Solid Liquid Mass Transfer, Aeration, Fermentation, Chemical, Reaction, Gas Dispersion, Solvent Extraction and Homogenizing are some of the important features of our Process Equipment. Materials used in the construction of the Process Unit are Carbon Steel, Stainless Steel, Aluminum Incolloy and Hastalloy. All our products are of premium quality and completely safe to use. Heat Transfer Equipment https://www.technofabengineering.net/heat-transfer-equipment.htm https://www.technofabengineering.net/heat-transfer-equipment.htm Thu, 27 Jun 2019 00:00:00 +0530 We are one of the leading Manufacturers and Exporters of Heat Transfer Equipment, which comprises equipment for the reduction process, condenser, chillers, agitated thin film Evaporator, Rotary Vacuum Dryer, Extractor, Falling Film Evaporator and High Vacuum Solvent extraction System. Our industrial Heat Transfer Equipment gives an edge over conventional method.In our solvent extraction system, the dried Sludge remains after distillation process can be handled with great ease. The left over organic matter in the sludge is in PPM level, which is completely safe. Tough compound can thus be handled easily since the entire process is carried out in high Vacuum System. Our High Temperature Heat Transfer Equipment does not required any direct human contact hence it is completely safe and convenient to us. Sand Mill https://www.technofabengineering.net/sand-mill.htm https://www.technofabengineering.net/sand-mill.htm Fri, 06 Jul 2018 00:00:00 +0530 We are one of the most applauded Manufacturers & Exporters of high quality Sand Mill and High speed Dispersing unit for Wet Grinding, Blending, Mixing homogenizing and particle size Reduction. Our Horizontal and Vertical Sand mills are in great demand in the Industries. Our Sand Mills are of excellent quality which helps to attain the optimum results. We have several types of medium like Glass Beads, Steel Balls, Sand, and Zirconium Oxide. We offer to our customer Sand Mill in various design such as : Vertical Open Type Vertical Pressurized Horizontal Pressurized with dynamic gap separator High speed high shear Liquid disperser Material of Construction : Shell : SS 316, SS 316L, Incoloy Rotor : SS 316, Tungsten Carbide, Nylon & PVDF Type of Medium : Glass Beads, Steel Balls, Zirconium Oxide Sand Mills are widely used by several industrial branches like : Paint Foodstuff Dyes Pigments Resins Mineral Oil Varnish Cosmetics chemicals The variables which are taken in to consideration are : Grinding Medium Type of impellers & Velocity Fill ratio Mill base Viscosity Temperature Mill base pigment Percentage Fractional Distillation Columns https://www.technofabengineering.net/fractional-distillation-columns.htm https://www.technofabengineering.net/fractional-distillation-columns.htm Fri, 06 Jul 2018 00:00:00 +0530 We provide efficient Fractional Distillation Column. We design and supply total System including Re-boiler, Column, Condenser, Reflux device & Receiver. Industrial Fractional Distillation Columns are Systems for continuous as well as batch distillation. We also erect and commission Fractional Distillation Columns as required by the client.As a Part of the system, we design and supply vacuum system for Batch/Continuous Distillation, which Includes water combined with Steam jet vacuum system to produce vacuum up to 1 torr. This system does not require any barometric leg thus can be placed even on the ground floor.Raw material used :·         Carbon steel·         SS 304·         SS 316·         Incolloy·         HastalloyFeatures :·         Re- boiler or Distillation Kettle·         Packed column or Bubble cap Column·       Condenser conventional or Stand alone with integral reflux device·         Reflux device·         Receiver Column packing offered are : ·         Structured packing·         Raschig ring·         Pall ring·         Intallox saddles·         Bubble cap design Contra Rotary Mixer https://www.technofabengineering.net/contra-rotary-mixer.htm https://www.technofabengineering.net/contra-rotary-mixer.htm Tue, 28 Apr 2020 00:00:00 +0530 Contra Mixer as the name suggests works on the principle of Contra rotation of Blades for simultaneous beating and scraping operation. The mixer is highly versatile and mostly used for manufacturing Tooth Paste, Creams, Cosmetics and other viscous products.The contra rotary mixture is so designed to withstand high vacuum applied during the process for optimum mixing. The mixer is provided with a jacket for cooling or heating as per the application.We offer Contra mixer suitable for manufacturing Tooth Paste, High viscous Creams, viscous Cosmetics products and other viscous products mix.Salient Features Compact design requires comparatively smaller floor space. Product container mounted on mounting lugs or legs as required by customer. Hydraulic power pack with cylinders are provided for lowering and lifting movement of top cover with stirrer's drive assembly. Lowering and lifting movement of drive assembly will be achieved through hydraulic lifting system for easy of cleaning and changeover of products. (OPTIONAL - Provided On Demand). Fixed product container for safe operation during mixing. As stirrer is a top driven and sealing doesn't comes in contact with product, there isn't any black particle contamination problem. Steam circulation jacket for mixing bowl, to heat the product during operation & water circulation facility to cool the product during or after mixing. (made out of mild steel or SS304, as per customer requirement). Material discharge from bottom. Flush bottom valve provided for material discharge. M/C provided with Light glass, Sight glass, material inlet, water inlet, steam & washing water inlet, air suction valve for vacuum, vacuum gauge etc. Mixing assembly have two speed facility. Variable speed drive facility for mixing assembly will be provided on extra cost, as an OPTIONAL facility. Spray ball assembly to effectively SIP. Paddle Dryers https://www.technofabengineering.net/paddle-dryers.htm https://www.technofabengineering.net/paddle-dryers.htm Fri, 06 Jul 2018 00:00:00 +0530 Paddle Dryer is a highly efficient, mechanically agitated, indirect heat transfer device that adds or removes heat from a process mass. It is used for indirect drying, heating, cooling, pasteurization, crystallizing, and reacting of pastes, cakes, powders, and granules.Dual counter-rotating shafts with unique intermeshing wedge shape paddles produce intimate mixing and optimize heat transfer. The use of hollow paddles for heat transfer results in a compact machine. The heat transfer medium: steam, oil, thermal fluid, water, or glycol is isolated from the process mass.Advantages High thermal efficiency Heat transfer medium does not come into contact with the product. Gas is not used to convey the product. Off-gas flow is minimal. Precise control of temperature Uniform product quality, through mixing and movement of the product Continuous process on a once-through basis High heat transfer area to process volume ratio - reduced floor space Pre-conditioning with recycle is typically not required. Easy to operate, requires minimal attention Safer than direct drying when processing combustible material Simple durable design for easy and low maintenance Enclosed process contains odors and hazardous materials Application Drying Heating & cooling Process Chemical: salts, catalyst, brominated organics, cellulose, starch Polymer and plastic: polypropylene, polycarbonate, poly phenyl sulfide, PET, PTA Mineral and metal: metal powders, metal carbonates, sulfates and hydroxides Vacuum Extractor https://www.technofabengineering.net/vacuum-extractor.htm https://www.technofabengineering.net/vacuum-extractor.htm Tue, 28 Apr 2020 00:00:00 +0530 The Extractor is specially designed High Vacuum Distillation Unit that comprises multi-bladed stirrer design with a set of fixed & moving blades. The bottom set is specially designed blades, one set having pin-type construction & another sweeper profile to match the bottom dish profile in closed proximity. The distillation is done under high vacuum condition to achieve effective separation by distillation at relatively low temperature, especially to suit the heat sensitive product.  Since the extraction is achieved up to the last drop one can get rid of the effluent problem during the operation. The total operation is carried out in an enclosed environment there is no environmental adverse effect. You can achieve zero discharge process. Drag Conveyors https://www.technofabengineering.net/drag-conveyors.htm https://www.technofabengineering.net/drag-conveyors.htm Fri, 06 Jul 2018 00:00:00 +0530 Drag conveyors are a great complement to screw conveyors and belt conveyors and a requirement of many bulk material handling applications. Drag conveyors can be used to meter or transfer bulk materials from one process to another. The compact and versatile design allows drag conveyors to fit almost any plant layout.Drag Conveyors are available in many configurations. They are designed based on industrial standards and are modular in construction providing flexibility for a variety of applications.Advantages Ideal for handling dry, free-flowing materials Materials are static and move en-masse by paddles or chain Minimal product degradation during conveying Require less horsepower than other types of conveyors Available Features / Options Drop-forged chain and paddles for increased equipment life UHMWPE disc for effective dragging the material effectively with minimum friction Easily replaceable wear liners for minimal down time High torque drive units to power through upset conditions Screw Conveyors https://www.technofabengineering.net/screw-conveyors.htm https://www.technofabengineering.net/screw-conveyors.htm Fri, 06 Jul 2018 00:00:00 +0530 Shafted screw conveyors are used in thousands of industrial applications every day for efficiently conveying a variety of bulk materials. A screw conveyor’s main function is to transfer bulk materials from one process to another. Screw conveyors are very cost-effective and require minimal maintenance to operate.Screw Conveyors are available in many configurations and are designed based on industrial standards They can be modular in construction providing flexibility for a variety of applications.Advantages of Using Screw Conveyors Ideal for handling dry to semi-fluid materials - free-flowing to sluggish Cost-effective when compared to other conveying devices such as belt, pneumatic or aero-mechanical conveyors Efficiently distributes bulk materials to various locations using multiple inlet and discharge points Totally enclosed for corrosive or hazardous requirements Available Features / Options Custom engineered for your specific application Wide range of construction materials (carbon steel,SS316,SS316L,SS304,) Flight configurations available for mixing and chopping Designs available for cooling and heating products utilizing jacketed housings Pneumatic Conveying System https://www.technofabengineering.net/pneumatic-conveying-system.htm https://www.technofabengineering.net/pneumatic-conveying-system.htm Fri, 06 Jul 2018 00:00:00 +0530 The pneumatic conveying system is a method of conveying dry material in a pipeline through air without any moving parts. The pneumatic conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Each pneumatic conveying system is designed & customized as per the application popularly known as custom conveyor system. The provided solution is assured to be the best pneumatic conveying system solution for the application.Prime Mover can be Roots blower, Centrifugal blower, Centrifugal fan, Radial blower.The motive force for the transfer of materials comes from a combination of pressure differential and the flow of a gas, such as air or nitrogen.Application : For transferring powders, granules, and other dry bulk materials. Chemical Reactor https://www.technofabengineering.net/chemical-reactor.htm https://www.technofabengineering.net/chemical-reactor.htm Tue, 28 Apr 2020 00:00:00 +0530  Reactor for the chemical process is an art along with the science. Years of in-depth industrial experience at various level raw chemicals resulted in meticulously designing the reactor with the correct specifications. It requires vision to understand the chemical process thoroughly. The amalgamation of various process in a proper manner is the key to perfect reactor design We offer design fabrication, testing and commissioning of the agitation system which can be a part of the complex chemical reaction.  Solid suspension, solid dissolution in the liquid, Heat and mass transfer, product mixing, distillation, crystallization, liquid/liquid extraction, Reduction, Helogenations polymerization. are the few process for which we designthe reactors We also offer skid mounted self-contained pilot plants with automation. We cater to Pharmaceutical, Fine chemicals, Dyes, Chemicals, Polyester plants As per your process requirements, we fabricate Jacketed vessel, limpet coil reactor, dimple type reactor, high-pressure reactor or autoclave. Reactors with internal coils and various combinations of agitators We also offer reactors with stuffing box, Mechanical seal and Magnetic drive for the sealing Salient Features Complete range of chemical reactors as per your specifications Stainless steel and all ally steel Adheres to ASME and other standards Special attention to Argon and Arc welding procedures100 % RTD Different types of agitator design Registered with leading consultants and third-party inspection agency. Reliable After-sales support On-time delivery Material Of Construction Stainless Steel(Sa 240 Gr.316,316L,304,304L,310,321) Carbon Steel Incoloy Hastalloy TI Heat Exchangers https://www.technofabengineering.net/heat-exchangers.htm https://www.technofabengineering.net/heat-exchangers.htm Tue, 28 Apr 2020 00:00:00 +0530 We are one of the leading Manufacturers and Exporters of Heat Exchanger, which comprises equipment for the reduction process, condenser, chillers, Falling Film Evaporator and High Vacuum Solvent extraction System. Our industrial Heat Transfer Equipment gives an edge over conventional method. Tough compound can thus be handled easily since the entire process is carried out in high Vacuum System. Our High Temperature Heat Transfer Equipment does not required any direct human contact hence it is completely safe and convenient to us.All heat exchangers are designed and engineered in accordance with international standards of design and constructions including TEMA, ASME, and HEI etc. Thermal design is carried out with the help of customized software, HTRI and with our expert design engineers to meet custom requirements.Advantage Over Conventional Method Totally enclosed operation No direct contact of human body completely safe Most efficient & faster operation Water used in reduction process can be reused in the next batch, hence no liquid effluent also no mess up around the work place Material of Construction : Carbon Steel, Stainless Steel 304, 304 L, 316, 316 L, C22,C276, Inconel 600.625,800,825, Copper ,TI Applications Shell & Tube Heat Exchangers Multiple Effect Evaporators Re-boilers U – Bundle Finned Tube Heat Exchangers Heat Recovery Unit Agitated Nutsche Filter Dryer https://www.technofabengineering.net/agitated-nutsche-filter-dryer.htm https://www.technofabengineering.net/agitated-nutsche-filter-dryer.htm Fri, 06 Jul 2018 00:00:00 +0530 Agitated Filter is a closed vessel designed to separate solid and liquid by filtration under pressure or vacuum. The closed operation ensures odorless, contamination free and nonpolluting working conditions maintaining product purity and hygiene. The advanced technology of agitation and hydraulics used in the equipment makes it versatile and user friendly. The resulting wet cake can be re-slurried and washed thoroughly with water or solvents.Wash liquid quantity can be controlled and recycled, reducing effluent load. The discharge of wet cake is automatic. If the process demands filtration in chilled or hot condition, it is also possible. Drying of wet cake is also possible when drying features are incorporated.Advantages The equipment is functionally safe and easy to operate. It can carry out various phase of process operations, viz: Crystallization , filtration, extraction, Discoloration, Washing and drying. The number of conventional machines employed for filtration process are also reduced. It has multi- functional utility, saves on power, labor, floor space, material wastage and time. Applications : The filter dryer has wide field of applications in chemical, pharmaceutical, Agro chemicals, fine chemicals, and food industries. Agitation System for chemical reactions https://www.technofabengineering.net/agitation-system.htm https://www.technofabengineering.net/agitation-system.htm Tue, 28 Apr 2020 00:00:00 +0530 We offer various types of mixing agitator for Stainless, Inconel, Hastalloy Reactors. We can design and offer best-suited agitator based on your input. We also offer commissioning of the system at clients works. we offer the system with Stuffing box, Mechanical seal as well as Magnetic driveWe supply a wide range of mixing systems to the Pharmaceutical, Specialty Chemicals, Biotech, Paints Dyes and intermediates plants as well as Polyester plant industries. We design and manufacture mixing systems for various applications: Blending/Heat Transfer Solid Suspension Emulsification Solid, liquid mixing /Gas sparger system. Gas Dispersion Hydrogenation High vacuum distillation Fractional distillation Batch as well as continuous Advantages Reduction in Power Consumption without compromising the mixing requirement Improvement in mixing performance Heat Transfer and Mass Transfer Transfer, Blending or Solid Suspension, Blend time Easy Maintenance due to the modular and rugged design The agitators offered by us are guaranteed for the stated mixing performance. If the specified performance is not achieved the agitator will be modified or replaced at our cost. Bubble Absorption System https://www.technofabengineering.net/bubble-absorption-system.htm https://www.technofabengineering.net/bubble-absorption-system.htm Fri, 06 Jul 2018 00:00:00 +0530 In Petrochemical industries, In spinning process, Monomer washing is done where there is lots of monomer loses due to foam formation in washing. We Supply Bubble Absorption System to extract foam the washing process that will minimize lose of monomer during washing process.